阿拉巴马大学冶金与材料工程系Xin Wang老师招收全奖博士研究生
9360
【导师简介】
Dr. Xin Wang将于2023年8月加入阿拉巴马大学冶金与材料工程系，任职助理教授。在入职阿拉巴马大学前，Dr. Xin Wang于2011和2014年分别在西安交通大学、上海交通大学取得材料科学与工程的本科和硕士学位，并于2014-2018年在加州大学尔湾分校、美国工程院院士Dr. Julie M. Schoenung课题组攻读并取得博士学位。博士期间主要运用先进电子显微镜、微观力学测试等方法研究镁合金的孪晶变形机理，并通过材料微观组织控制优化材料性能。现于加州大学尔湾分校进行博士后研究，作为Lead Postdoc参与完成多个美国国家自然科学基金、国防部资助项目，致力于探索新型结构材料的微观组织及缺陷、变形机制以及先进制造技术。
研究团队主要研究方向：
团队将于2023年秋季/2024年春季/2024年秋季招收两名有材料、冶金、机械、物理及相关专业背景的全奖博士生。欢迎感兴趣的申请者发送邮件至: 1point3acres.com,并附上简历、成绩单、TOEFL/IELTS成绩单，以及个人科研经历、兴趣。
【学校概况】
阿拉巴马大学 (The University of Alabama, UA)是坐落在美国Alabama州Tuscaloosa的一所公立研究型大学，创办于1831年，是阿拉巴马大学系统的旗舰主校区，占地面积多达1970 acre,是全美历史最悠久，规模最大，校园最美的大学之一。阿拉巴马大学被评为一级研究类大学(R1) ，根据2023 U.S. News & World Report 发布的美国大学综合排名，其工程学院排名全美第99名。此外，阿拉巴马大学的橄榄球队Crimson Tide是美国最富盛名的大学橄榄球队之一。由于所在地区的关系，阿拉巴马大学与NASA有长期合作关系，在航天工程等领域取得了许多备受瞩目的研究成果。
【院系介绍】
冶金与材料工程系提供材料科学与工程/冶金工程硕士及博士学位。配备3D打印、定向和高速凝固、悬浮熔化、溅射和化学气相沉积、腐蚀、纳米压痕、热性能、热力学性能测试、材料结构表征等先进设施。金属铸造工厂拥有最新的金属熔炼和铸造设备，是美国最好的教学、研究和服务于金属铸造和加工业的设施之一。此外，UA将于2023年购入安装全新的Spectra 300 (S)TEM球差矫正扫描透射电子显微镜、Talos F200i TEM两台扫描电子显微镜(Helios 5 Hydra CX DualBeam and a Helios 5 UX) ，以及最新的三维原子探针设备LEAP 6000 XR。
Dr. Xin Wang will join the Department of Metallurgical and Materials Engineering at the University of Alabama as an Assistant Professor in August 2023. Prior to joining the University of Alabama, Dr. Wang obtained her bachelor's and master's degrees in Materials Science and Engineering from Xi'an Jiaotong University and Shanghai Jiao Tong University in 2011 and 2014, respectively. She then pursued her doctoral studies from 2014 to 2018 under the supervision of Dr. Julie M. Schoenung, a member of the National Academy of Engineering, at the University of California, Irvine. During her doctoral research, Dr. Wang primarily utilized advanced electron microscopy and micro-mechanical testing techniques to investigate the twinning deformation mechanisms in magnesium alloys. She also focused on optimizing material properties through microstructural control. Currently, she is conducting postdoctoral research at the University of California, Irvine, where she serves as a lead Postdoc, participating in multiple research projects funded by the National Science Foundation and the Department of Defense. Her research efforts are dedicated to exploring the microstructure, defects, deformation mechanisms, and advanced manufacturing technologies of novel structural materials.
The team will primarily focus on the following research directions:
; Micro-mechanical testing
; In-situ electron microscopy
; Advanced materials preparation (powder metallurgy, laser 3D printing, thin film deposition, etc.)
; Physical metallurgy
The team currently has two openings for doctoral students. We invite interested students majoring in materials science, metallurgy, mechanical engineering, physics, and related fields to send an email to Dr. Wang: 1point3acres.com. Please make sure to include your CV, transcript, TOEFL/IELTS scores, as well as your research experience and interests in your email.
About the University:
The University of Alabama (UA), located in Tuscaloosa, Alabama, is a public research university founded in 1831. It serves as the flagship campus of the University of Alabama System and covers a vast area of 1,970 acres. UA is one of the oldest, largest, and most beautiful universities in the United States. It is classified as an R1 research university and, according to the 2023 U.S. News & World Report, its College of Engineering is ranked 99th nationwide. Due to its location, the university has a long-standing partnership with NASA, contributing to notable research accomplishments in aerospace engineering and other fields.
About the Department:
The Department of Metallurgical and Materials Engineering is equipped with advanced facilities, including directional and high-speed solidification, suspension melting, sputtering, chemical vapor deposition, additive manufacturing, nano-indentation, thermal performance and thermodynamic property testing, and advanced material characterization capabilities. The Metal Casting Foundry boasts state-of-the-art metal melting and casting equipment and is one of the finest facilities in the United States for teaching, research, and serving the metal casting and processing industry. Moreover, UA is set to install two new cutting-edge TEM (including a Spectra 300 (S)TEM with aberration correction and a Talos F200i TEM), two SEM (Helios 5 Hydra CX DualBeam and Helios 5 UX), and the latest 3D atom probe equipment, the LEAP 6000 XR, in 2023.
Dr. Xin Wang将于2023年8月加入阿拉巴马大学冶金与材料工程系，任职助理教授。在入职阿拉巴马大学前，Dr. Xin Wang于2011和2014年分别在西安交通大学、上海交通大学取得材料科学与工程的本科和硕士学位，并于2014-2018年在加州大学尔湾分校、美国工程院院士Dr. Julie M. Schoenung课题组攻读并取得博士学位。博士期间主要运用先进电子显微镜、微观力学测试等方法研究镁合金的孪晶变形机理，并通过材料微观组织控制优化材料性能。现于加州大学尔湾分校进行博士后研究，作为Lead Postdoc参与完成多个美国国家自然科学基金、国防部资助项目，致力于探索新型结构材料的微观组织及缺陷、变形机制以及先进制造技术。
研究团队主要研究方向：
- 微观力学测试
- 原位电子显微镜
- 先进材料制备(粉末冶金、激光3D打印、薄膜沉积等)
- 物理冶金学
团队将于2023年秋季/2024年春季/2024年秋季招收两名有材料、冶金、机械、物理及相关专业背景的全奖博士生。欢迎感兴趣的申请者发送邮件至: 1point3acres.com,并附上简历、成绩单、TOEFL/IELTS成绩单，以及个人科研经历、兴趣。
【学校概况】
阿拉巴马大学 (The University of Alabama, UA)是坐落在美国Alabama州Tuscaloosa的一所公立研究型大学，创办于1831年，是阿拉巴马大学系统的旗舰主校区，占地面积多达1970 acre,是全美历史最悠久，规模最大，校园最美的大学之一。阿拉巴马大学被评为一级研究类大学(R1) ，根据2023 U.S. News & World Report 发布的美国大学综合排名，其工程学院排名全美第99名。此外，阿拉巴马大学的橄榄球队Crimson Tide是美国最富盛名的大学橄榄球队之一。由于所在地区的关系，阿拉巴马大学与NASA有长期合作关系，在航天工程等领域取得了许多备受瞩目的研究成果。
【院系介绍】
冶金与材料工程系提供材料科学与工程/冶金工程硕士及博士学位。配备3D打印、定向和高速凝固、悬浮熔化、溅射和化学气相沉积、腐蚀、纳米压痕、热性能、热力学性能测试、材料结构表征等先进设施。金属铸造工厂拥有最新的金属熔炼和铸造设备，是美国最好的教学、研究和服务于金属铸造和加工业的设施之一。此外，UA将于2023年购入安装全新的Spectra 300 (S)TEM球差矫正扫描透射电子显微镜、Talos F200i TEM两台扫描电子显微镜(Helios 5 Hydra CX DualBeam and a Helios 5 UX) ，以及最新的三维原子探针设备LEAP 6000 XR。
Dr. Xin Wang will join the Department of Metallurgical and Materials Engineering at the University of Alabama as an Assistant Professor in August 2023. Prior to joining the University of Alabama, Dr. Wang obtained her bachelor's and master's degrees in Materials Science and Engineering from Xi'an Jiaotong University and Shanghai Jiao Tong University in 2011 and 2014, respectively. She then pursued her doctoral studies from 2014 to 2018 under the supervision of Dr. Julie M. Schoenung, a member of the National Academy of Engineering, at the University of California, Irvine. During her doctoral research, Dr. Wang primarily utilized advanced electron microscopy and micro-mechanical testing techniques to investigate the twinning deformation mechanisms in magnesium alloys. She also focused on optimizing material properties through microstructural control. Currently, she is conducting postdoctoral research at the University of California, Irvine, where she serves as a lead Postdoc, participating in multiple research projects funded by the National Science Foundation and the Department of Defense. Her research efforts are dedicated to exploring the microstructure, defects, deformation mechanisms, and advanced manufacturing technologies of novel structural materials.
The team will primarily focus on the following research directions:
; Micro-mechanical testing
; In-situ electron microscopy
; Advanced materials preparation (powder metallurgy, laser 3D printing, thin film deposition, etc.)
; Physical metallurgy
The team currently has two openings for doctoral students. We invite interested students majoring in materials science, metallurgy, mechanical engineering, physics, and related fields to send an email to Dr. Wang: 1point3acres.com. Please make sure to include your CV, transcript, TOEFL/IELTS scores, as well as your research experience and interests in your email.
About the University:
The University of Alabama (UA), located in Tuscaloosa, Alabama, is a public research university founded in 1831. It serves as the flagship campus of the University of Alabama System and covers a vast area of 1,970 acres. UA is one of the oldest, largest, and most beautiful universities in the United States. It is classified as an R1 research university and, according to the 2023 U.S. News & World Report, its College of Engineering is ranked 99th nationwide. Due to its location, the university has a long-standing partnership with NASA, contributing to notable research accomplishments in aerospace engineering and other fields.
About the Department:
The Department of Metallurgical and Materials Engineering is equipped with advanced facilities, including directional and high-speed solidification, suspension melting, sputtering, chemical vapor deposition, additive manufacturing, nano-indentation, thermal performance and thermodynamic property testing, and advanced material characterization capabilities. The Metal Casting Foundry boasts state-of-the-art metal melting and casting equipment and is one of the finest facilities in the United States for teaching, research, and serving the metal casting and processing industry. Moreover, UA is set to install two new cutting-edge TEM (including a Spectra 300 (S)TEM with aberration correction and a Talos F200i TEM), two SEM (Helios 5 Hydra CX DualBeam and Helios 5 UX), and the latest 3D atom probe equipment, the LEAP 6000 XR, in 2023.
- 3
0条回复